Ahmadi, Isa
Analysis of interlaminar stresses in cross-ply composite cylinders subjected to radial loads [Volume 2, Issue 3, 2015, Pages 43-54]
Ahmadifard, Saeed
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2016, Pages 31-36]
Alaei, Alireza
Study of microstructure and tribological behavior of the composite layer produced of silicon carbide particles on a steel ASTM A106 GTAW welding method [Volume 2, Issue 1, 2015, Pages 65-72]
Aliha, Mohammad reza
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Alimirzaei, Sajad
Analytical solution for free vibration of functionally graded carbon nanotubes (FG-CNT) reinforced double-layered nano-plates resting on elastic medium [Volume 2, Issue 3, 2015, Pages 55-66]
Amini, Saeed
Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite [Volume 2, Issue 4, 2016, Pages 51-58]
Amininejad, Shahab
Experimental and theoretical fracture analysis of quasi-brittle polymer components containing V-notches with end holes under combined tensile-shear loading [Volume 2, Issue 2, 2015, Pages 41-54]
Azdast, Taher
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Azdast, Taher
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2016, Pages 37-44]
B
Behravesh, Amir Hossein
Investigation of thermoplastic pultrusion for tubular product production using prepregs [Volume 2, Issue 1, 2015, Pages 23-32]
D
Davoodi, Danial
Investigating the physical and surface properties at high temperature of the Al/SiC nanocomposite produced by powder metallurgy [Volume 2, Issue 1, 2015, Pages 33-40]
Divandari, Mehdi
Melt-Solid-Gas behavior in the interface of Al/Mg composite produced by centrifugal casting [Volume 2, Issue 3, 2015, Pages 75-82]
Doniavi, Ali
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Doniavi, Ali
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2016, Pages 37-44]
E
Ebadi-Rajoli, Jafar
Comparison of numerical analysis methods for progressive damage analysis in composite bolted joints and suggestion of new method for bolted joints analysis [Volume 2, Issue 2, 2015, Pages 63-70]
Esmaili, Parastoo
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Esmaili, Parastoo
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2016, Pages 37-44]
Eungkee Lee, Richard
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Eungkee Lee, Richard
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2016, Pages 37-44]
F
Fazel Najafabadi, Mahmoud
Study of microstructure and tribological behavior of the composite layer produced of silicon carbide particles on a steel ASTM A106 GTAW welding method [Volume 2, Issue 1, 2015, Pages 65-72]
Fazlali, Babak
Fatigue life prediction of symmetric cross ply laminated composite using a developed continuum damage mechanics based model [Volume 2, Issue 1, 2015, Pages 13-22]
G
Ghajar, Mohsen
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Ghannadpour, Seyed Amir Mahdi
Post-buckling analysis of anti-symmetric cross-ply composite plates under end-shortening [Volume 2, Issue 3, 2015, Pages 35-42]
Ghasemi, Ahmad Reza
Three-dimensional residual stresses analysis of nanocomposite polymeric matrix based on fiber reinforced carbon nanotubes [Volume 2, Issue 4, 2016, Pages 23-30]
Ghasemi, Roohallah
Damage analysis of holed composite laminates using continuum damage mechanics [Volume 2, Issue 3, 2015, Pages 22-34]
Ghayour, Hamid
Investigating the physical and surface properties at high temperature of the Al/SiC nanocomposite produced by powder metallurgy [Volume 2, Issue 1, 2015, Pages 33-40]
Ghayour, Hamid
Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles [Volume 2, Issue 2, 2015, Pages 55-62]
Gholami, Farshad
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
Gholami, Hamid
Preparation and properties investigation of conductive Polyaniline-Zinc Oxide nanocomposites [Volume 2, Issue 1, 2015, Pages 7-12]
Golzar, Mohammad
Investigation of thermoplastic pultrusion for tubular product production using prepregs [Volume 2, Issue 1, 2015, Pages 23-32]
H
Hakimi, Emad
Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite [Volume 2, Issue 4, 2016, Pages 51-58]
Hasanzadeh, Rezgar
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Hasanzadeh, Rezgar
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2016, Pages 37-44]
Hashemi, Ramin
Experimental determination of forming limit diagram in Aluminum-Copper two-layer metallic sheets [Volume 2, Issue 4, 2016, Pages 45-50]
Heidari, Mojtaba
Failure analysis of composite wing adhesive joints using 3D cohesive interface element [Volume 2, Issue 2, 2015, Pages 31-40]
Heidari-Rarani1, Mohammad
Analytical solution for free vibration of functionally graded carbon nanotubes (FG-CNT) reinforced double-layered nano-plates resting on elastic medium [Volume 2, Issue 3, 2015, Pages 55-66]
Heidarpour, Akbar
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2016, Pages 31-36]
K
Karajibani, Ehsan
Experimental determination of forming limit diagram in Aluminum-Copper two-layer metallic sheets [Volume 2, Issue 4, 2016, Pages 45-50]
Kazemi, Ali
Damage analysis of holed composite laminates using continuum damage mechanics [Volume 2, Issue 3, 2015, Pages 22-34]
Kazemi, Shahab
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2016, Pages 31-36]
Khalili, Seyed Mohammadreza
Micromechanics modeling and experimental characterization of shape memory alloy short wires reinforced composites [Volume 2, Issue 1, 2015, Pages 1-6]
Khoramishad, Hadi
Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive- riveted joints [Volume 2, Issue 2, 2015, Pages 71-78]
M
Madoliat, Reza
Fatigue life prediction of symmetric cross ply laminated composite using a developed continuum damage mechanics based model [Volume 2, Issue 1, 2015, Pages 13-22]
Madoliat, Reza
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Mamaghani, Sajad
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Mamaghani, Sajjad
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2016, Pages 37-44]
Mazaheri, Hossein
Study of microstructure and tribological behavior of the composite layer produced of silicon carbide particles on a steel ASTM A106 GTAW welding method [Volume 2, Issue 1, 2015, Pages 65-72]
Mehrdad Shokrieh, Mahmood
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Mehri Khansari, Nabi
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Mohammadi, Bijan
Fatigue life prediction of symmetric cross ply laminated composite using a developed continuum damage mechanics based model [Volume 2, Issue 1, 2015, Pages 13-22]
Mohammadi, Bijan
Failure analysis of composite wing adhesive joints using 3D cohesive interface element [Volume 2, Issue 2, 2015, Pages 31-40]
Mohammadi, Bijan
Damage analysis of holed composite laminates using continuum damage mechanics [Volume 2, Issue 3, 2015, Pages 22-34]
Mohammadi, Mohammad
Three-dimensional residual stresses analysis of nanocomposite polymeric matrix based on fiber reinforced carbon nanotubes [Volume 2, Issue 4, 2016, Pages 23-30]
Mokhtari, Majid
Comparison of numerical analysis methods for progressive damage analysis in composite bolted joints and suggestion of new method for bolted joints analysis [Volume 2, Issue 2, 2015, Pages 63-70]
Moosavi, Seyed Hesam
Preparation and properties investigation of conductive Polyaniline-Zinc Oxide nanocomposites [Volume 2, Issue 1, 2015, Pages 7-12]
Mousavi, Atefeh
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
N
Naghmehsanj, Mohamma Reza
Robust vibration control of a functionally graded beam with a variable cross section [Volume 2, Issue 2, 2015, Pages 17-30]
Nasiri, Sajjad
Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive- riveted joints [Volume 2, Issue 2, 2015, Pages 71-78]
Nikbakht, Ali
Sliding contact between a rigid cylindrical punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 2, Issue 3, 2015, Pages 11-22]
P
Pol, Mohammad Hosein
Experimental investigation of the effect effective of factors and parameters on the punch on the properties of quasi-static punching shear the glass/epoxy composite [Volume 2, Issue 4, 2016, Pages 13-22]
R
Rahmani, Behroz
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
Rahmani, Behroz
Robust vibration control of a functionally graded beam with a variable cross section [Volume 2, Issue 2, 2015, Pages 17-30]
Rahnama, Hosein
Exact micromechanical stress analysis of long fiber composites under uniform tensile loading [Volume 2, Issue 3, 2015, Pages 1-10]
S
Sadighi, Mojtaba
Sliding contact between a rigid cylindrical punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 2, Issue 3, 2015, Pages 11-22]
Saeedi, Ali
Micromechanics modeling and experimental characterization of shape memory alloy short wires reinforced composites [Volume 2, Issue 1, 2015, Pages 1-6]
Safarabadi, Majid
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Salamattalab, Mazaher
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Salimi-Majd, Davood
Failure analysis of composite wing adhesive joints using 3D cohesive interface element [Volume 2, Issue 2, 2015, Pages 31-40]
Sarvari, Morteza
Melt-Solid-Gas behavior in the interface of Al/Mg composite produced by centrifugal casting [Volume 2, Issue 3, 2015, Pages 75-82]
Sedighi, Mohammad
Experimental determination of forming limit diagram in Aluminum-Copper two-layer metallic sheets [Volume 2, Issue 4, 2016, Pages 45-50]
Shaali, Mohammad Hasan
Simulated nano-indentation method for estimation of micro-residual stresses of a unidirectional composite ply [Volume 2, Issue 4, 2016, Pages 1-12]
Shahin, Nasir
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2016, Pages 31-36]
Shakeri, Alireza
Preparation and properties investigation of conductive Polyaniline-Zinc Oxide nanocomposites [Volume 2, Issue 1, 2015, Pages 7-12]
Sharbatdar, Amir
Geometrically nonlinear analysis of moderately thick curved composite panels under lateral load [Volume 2, Issue 1, 2015, Pages 53-64]
Sharifi, Hasan
Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles [Volume 2, Issue 2, 2015, Pages 55-62]
Sharifi, Hassan
Investigating the physical and surface properties at high temperature of the Al/SiC nanocomposite produced by powder metallurgy [Volume 2, Issue 1, 2015, Pages 33-40]
Shirazi, Ali
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2016, Pages 31-36]
Shokrieh, Mahmood Mehrdad
Exact micromechanical stress analysis of long fiber composites under uniform tensile loading [Volume 2, Issue 3, 2015, Pages 1-10]
Shokrieh, Mahmood Mehrdad
Simulated nano-indentation method for estimation of micro-residual stresses of a unidirectional composite ply [Volume 2, Issue 4, 2016, Pages 1-12]
T
Talezadehlari, Ali
Sliding contact between a rigid cylindrical punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 2, Issue 3, 2015, Pages 11-22]
Tayebi, Morteza
Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles [Volume 2, Issue 2, 2015, Pages 55-62]
Tehrani-Dehkordi, Majid
Numerical modeling of bending behavior of intra-ply hybrid composites using finite element method [Volume 2, Issue 4, 2016, Pages 59-66]
Torabi, Alireza
Experimental and theoretical fracture analysis of quasi-brittle polymer components containing V-notches with end holes under combined tensile-shear loading [Volume 2, Issue 2, 2015, Pages 41-54]
Torabi, Keivan
Analytical solution for free vibration of functionally graded carbon nanotubes (FG-CNT) reinforced double-layered nano-plates resting on elastic medium [Volume 2, Issue 3, 2015, Pages 55-66]
Tutunchi, Mehrdad
Investigation of thermoplastic pultrusion for tubular product production using prepregs [Volume 2, Issue 1, 2015, Pages 23-32]